No Internet Through the Router.

Unable to go online from the router.
These steps are applicable for Routers only [like WNDR3300, WNR3500, WNR834B and WNR854T] not for Modems.

Step 1 : Disconnect the computer from the router and connect it to the modem.
Ensure that the computer is not assigned a static IP Address.
Turn the computer OFF and the Modem OFF.
Turn ON the Modem, than the Computer.
If you are able to go online, good.
If Not, Contact the Internet Provider.

Step 2 : If you are able to go online from the modem, follow these steps :
Connect the computer back to the router and the router to the modem as before.
Check the Internet LED is lit. If it is not, troubleshoot light status, as explained in the router manual. Check the LEDs for the ports with cables are lit. If not, move the cable to a different port. If there are still no lights, then troubleshoot light status, as explained in the router manual.

Step 3 : Power OFF the router and power it ON aftre some time [say 10 seconds].

Step 4 : Try Going Online. If still you cannot connect to the Internet, TryResetting the router as explained here.

Step 5 : After resetting the router, Open the setup page and configure the router yourself or you can try the SmartWizard.
SmartWizard helps the router discover whether you have a static or dynamic IP address, and whether you are using PPPoE to connect to your ISP.
If Dynamic IP Address is discovered, its good. If PPPoE or Static IP Address is recovered, you need to configure the router with the ISP settings yourself.

Step 6 : Now turn the Router and the Modem OFF. Turn On the Modem first than the Router.

WNDR3300

WNDR3300 : RangeMax™ Dual Band Wireless-N Router.

Advantages of RangeMax™ :

• The range is up to 500 feet.
• RangeMax has better performance than other MIMO products in noisy environments, such as areas crowded with networks, other wireless devices or 2.5 GHz phones.
• There are more configuration options than other MIMO products.
• The RangeMax technology is simpler than MIMO, which means less cost and less power consumption (only 6 watts for the router at full power). Unlike some MIMO technologies, RangeMax works on any frequency channel 1-13, (that's permitted in your country). RangeMax is unaffected by local objects moving, while MIMO technology throughput can drop 40 Mbps — to very poor performance!

What Adapters Benefit from RangeMax Routers and Access Points?

• It's best to use RangeMax adapters: WPN511, WPNT511, or WPN311, however, earlier adapters using SuperG, TurboG, 11g/11b WIFI or CentrinoTM technologies will also get increased performance.

WNDR3300 Product FAQs :
There are 8 internal antennas to adjust to interference and increase the range of the Wireless Router. The Quality of Service (QoS) is built in RangeMax which prioritizes the traffic based on different applications such as VOIP, Video and Gaming. It automatically assigns the right priority to the top applications you use. At present supports 4 type of QoS those are : Applications, Online gaming, MAC address and Ethernet LAN Port. WNDR3300 doesn’t support wireless repeating at this moment. When you open the setup page of the router, on the first screen the router will look for the latest firmware and automatically update it.

Forgotten or Lost Router's Password

How to recover the password for the router ?

• The router username is always admin
• The default password is password or [for older routers the password is : 1234].

If these settings dont work, than a reset is required. When the router is reset, all the information on the router is lost. The router becomes like a brand new device from the factory. The information that is losty can include the ISP Username and Password, IP addresses, security keys, Wireless Encryption and ports and services that were opened. These settings will need to be done again.

So ensure that you have the ISP information by handy before resetting the router.

• Press the reset button on the back [Rear Side of the router] until the test light blinks. This takes about 10 seconds. (Use a pen or paperclip to press it.)
• Release the button.
• Wait for the router to reboot [Wait until the lights on the router stop flashing].
• Try accessing the router with the default password.
• If you are not able to login with the default password, try the folowing steps.
• Unplug the router's power [Turn the router OFF].
• Press and hold the reset button. While the button is held down, reconnect router's power.
• Keep presseing the reset button for 20 seconds after reconnecting the power.
• Wait for the router to reboot. Try logging with the default password.
• Should work :)

For FR314, FR318, and FV318 :
These routers require reloading the firmware in order to recover the lost password. Download the most recent firmware from NETGEAR's Web site before proceeding.