Firmware release for WNDR3300.

New Firmware release for WNDR3300.
Firmware Version 1.0.26

New Features
Updated 5GHz channel to meet EMI regulations.

Firmware release for WNDR3300.

New Firmware release for WNDR3300.

Firmware Version 1.0.23

New Features
Add Wireless Repeating “WDS” function (supports 802.11N radio only)

Bug Fixes
WPS support in dual mode (2.4 GHz and 5 GHz).
Fixed - Low throughput issues.
Fixed - WPS AP Setup Lock option.
Fixed some GUI issues and added character validation rules.
Fixed - Internet firmware upgrade sometimes do not reboot after upgrade completed
Fixed - DHCP renewal issue.
Fixed - QoS / bandwidth control cannot work for fragmented packets
Fixed - Two LAN PCs can't play online game Starcraft.
Fixed - LAN to LAN SIP issue
Fixed - DUT can't disconnect SIP session after calling an virtual client.

Firmware Upgrade.

How to upgrade the firmware on Netgear router ?

Follow the steps to upgrade the firmware on the Netgear router.

DO NOT ATTEMPT TO UPGRADE THE FIRMWARE WITH A WIRELESS COMPUTER.

• Make a note of the settings that are done on the router.
• Log in to the Router's Setup page using a Web broswer. The URL is http://192.168.1.1 or 192.168.0.1 ( if you did not change the router’s IP address ).
• Click Maintenance > Router Upgrade
• Click Browse and find the file you just downloaded.
• Click Upload. Do not interrupt the upgrade while the router does this step. The router reboots when the upgrade is done.
• After the router boots up, log in the router again.
• You MUST Reset the router to default settings after upgrading the firmware
• Click Maintenance > Backup Settings
• Click Erase. The router reboots when the Erase operation is done.
• If you would like to check that the upgrade was successful, log in to the router again at http://192.168.1.1, and check the firmware version.
• Re-configure the router with the settings.