The Latest firmware version is : 1.6.01.34
This article applies to:
DG834 and DG834G (versions 1 and 2) firmware v2.10.22 and up
FVS114
FVS124G
FVS318v2
FVS318v3
FVS328
FVS338
FVX538
FWG114P
All references to the DG834 also apply to the DG834G. The only difference between the DG834 and the DG834G is the Wireless 802.11G access point built into the DG834G.
The VPN Wizards may differ slightly from router to router.
Gateway to Gateway VPN Configuration
(Also called a box-to-box configuration)
The purpose of a Gateway to Gateway VPN tunnel is to create a Virtual Private Network (VPN) network between LAN with no interaction necessary to the PCs on either side. No VPN client software is required on any of the PCs on either side of the LAN.
This type of VPN is often used for remote office connections to a main office.
The recommended procedure to quickly set up a VPN tunnel between the DG834 and the FVS318v3 is to use the VPN Wizard from each device’s web browser configuration window.
Overview
Before you start, you will need some basic network information.
IP LAN and WAN addresses on both sides.
The network pre-shared key that you will use to authenticate the VPN endpoints to each other. In the following example, netgear123 is used for the key.
Once you have this information, all you need to do is login to each router and enter the correct information into the appropriate fields of the VPN Wizard screens.
The article will be updated soon
Sorry for the delay.
Hope the document helps.
Sorry for the delay.
Hope the document helps.
1 comment:
This could be a useful post. I am trying to set up a VPN between myself and a friend so we can be on the same network. We have tried using the wizard, but with no success. We are not sure what we are doing really. Please complete this page, thanks!!
Post a Comment